Description: Geologic Map of New Mexico. This feature class records the location of non-oriented point data that are uniquely mappable (such as field photograph locations). These points may coincide with point data in other feature classes and will be related by StationID. This feature class is intended to represent just the location of data points and should be linked to a user-defined external data table that contains details about the information collected at this location. For multiple samples from a single area (e.g. paleocurrent data from a single outcrop and a photograph of the area measured) there will be one data point and an external table.COMMENTS TO MAP USERSA geologic map displays information on the distribution, nature, orientation, and age relationships of rock and deposits and the occurrence of structural features. Geologic and fault contacts are irregular surfaces that form boundaries between different types or ages of units. Data depicted on this geologic quadrangle map may be based on any of the following: reconnaissance field geologic mapping, a compilation of published and unpublished work, and photogeologic interpretation. Locations of contacts are not surveyed but are plotted by interpretation of the position of a given contact onto a topographic base map; therefore, the accuracy of contact locations depends on the scale of mapping and the interpretation of the geologist(s). Any enlargement of this map could cause misunderstanding in the detail of mapping and may result in erroneous interpretations. Site-specific conditions should be verified by detailed surface mapping or subsurface exploration. Topographic and cultural changes may not be shown due to recent development. Cross sections are constructed based upon the interpretations of the author made from geologic mapping and available geophysical and subsurface (drill hole) data.Cross sections should be used as an aid to understanding the general geologic framework of the map area and not be the sole source of information for use in locating or designing wells, buildings, roads, or other human-made structures.The New Mexico Bureau of Geology and Mineral Resources created the Open-File Geologic Map Series to expedite the dissemination of these geologic maps and map data to the public as rapidly as possible while allowing for map revision as geologists continued to work in map areas. Each map sheet carries the original date of publication below the map and the latest revision date in the upper right corner. In most cases, the original publication date coincides with the date of delivery of the map product to the National Cooperative Geologic Mapping Program (NCGMP) as part of New Mexico’s STATEMAP agreement. While maps are produced, maintained, and updated in an ArcGIS geodatabase, at the time of the STATEMAP deliverable, each map goes through cartographic production and internal review before uploading to the Internet. Even if additional updates are carried out on the ArcGIS map data files, citations to these maps should reflect this original publication date and the original authors listed. The views and conclusions contained in these map documents are those of the authors and should not be interpreted as necessarily representing the official policies, either expressed or implied, of the State of New Mexico or the U.S. Government.
Service Item Id: 06d22ee128344288b361cc4b9c908c76
Copyright Text: New Mexico Bureau of Geology & Mineral Resources
DataSourceID
(
nullable: true, length: 50, alias: DataSourceID, type: esriFieldTypeString
, Coded Values:
[DS00: IFSAR DEM ca. 2008; This data was produced by Intermap Technologies Inc.; Use Constraints: NGA End User License DoD Title 50 Uplift]
, [DS01: New Mexico Bureau of Geology and Mineral Resources, 2003, Geologic Map of New Mexico, 1:500,000: converted from previous data model to a USGS GeMS Level 3 data model by Kelsey Romero, Amy L. Dunn, and Phil L. Miller]
)
Description: Geologic Map of New Mexico. This feature class represents geologic units, or anthropogenic deposits that at the map scale cannot occupy mappable areas and are thus mapped as line features. These lines represent what could be mapped as areas at larger scales. Detailed information about each mapped unit is provided via a join based on the MapUnit field to the DescriptionOfMapUnits table.COMMENTS TO MAP USERSA geologic map displays information on the distribution, nature, orientation, and age relationships of rock and deposits and the occurrence of structural features. Geologic and fault contacts are irregular surfaces that form boundaries between different types or ages of units. Data depicted on this geologic quadrangle map may be based on any of the following: reconnaissance field geologic mapping, a compilation of published and unpublished work, and photogeologic interpretation. Locations of contacts are not surveyed but are plotted by interpretation of the position of a given contact onto a topographic base map; therefore, the accuracy of contact locations depends on the scale of mapping and the interpretation of the geologist(s). Any enlargement of this map could cause misunderstanding in the detail of mapping and may result in erroneous interpretations. Site-specific conditions should be verified by detailed surface mapping or subsurface exploration. Topographic and cultural changes may not be shown due to recent development. Cross sections are constructed based upon the interpretations of the author made from geologic mapping and available geophysical and subsurface (drill hole) data.Cross sections should be used as an aid to understanding the general geologic framework of the map area and not be the sole source of information for use in locating or designing wells, buildings, roads, or other human-made structures.The New Mexico Bureau of Geology and Mineral Resources created the Open-File Geologic Map Series to expedite the dissemination of these geologic maps and map data to the public as rapidly as possible while allowing for map revision as geologists continued to work in map areas. Each map sheet carries the original date of publication below the map and the latest revision date in the upper right corner. In most cases, the original publication date coincides with the date of delivery of the map product to the National Cooperative Geologic Mapping Program (NCGMP) as part of New Mexico’s STATEMAP agreement. While maps are produced, maintained, and updated in an ArcGIS geodatabase, at the time of the STATEMAP deliverable, each map goes through cartographic production and internal review before uploading to the Internet. Even if additional updates are carried out on the ArcGIS map data files, citations to these maps should reflect this original publication date and the original authors listed. The views and conclusions contained in these map documents are those of the authors and should not be interpreted as necessarily representing the official policies, either expressed or implied, of the State of New Mexico or the U.S. Government.
Service Item Id: 06d22ee128344288b361cc4b9c908c76
Copyright Text: New Mexico Bureau of Geology & Mineral Resources
Unique Value Renderer: Field 1: Description Field 2: N/A Field 3: N/A Field Delimiter: , Default Symbol:
N/A
Default Label: N/A UniqueValueInfos:
Value: Dike—Identity and existence are certain. Location is accurate. See unit description for Ti in the Description of Map Units. Label: Dike—Identity and existence are certain. Location is accurate. See unit description for Ti in the Description of Map Units. Description: N/A Symbol:
Value: Dike—Identity and existence are certain. Location is accurate. See unit description for Tim in the Description of Map Units. Label: Dike—Identity and existence are certain. Location is accurate. See unit description for Tim in the Description of Map Units. Description: N/A Symbol:
Value: Dike—Identity and existence are certain. Location is accurate. See unit description for TKi in the Description of Map Units. Label: Dike—Identity and existence are certain. Location is accurate. See unit description for TKi in the Description of Map Units. Description: N/A Symbol:
Value: Dike—Identity and existence are certain. Location is accurate. See unit description for Yi in the Description of Map Units. Label: Dike—Identity and existence are certain. Location is accurate. See unit description for Yi in the Description of Map Units. Description: N/A Symbol:
Value: Dike—Identity and existence are certain. Location is accurate. See unit description for Zi in the Description of Map Units. Label: Dike—Identity and existence are certain. Location is accurate. See unit description for Zi in the Description of Map Units. Description: N/A Symbol:
Value: Dike—Identity and existence are certain. Location is approximate. See unit description for Ti in the Description of Map Units. Label: Dike—Identity and existence are certain. Location is approximate. See unit description for Ti in the Description of Map Units. Description: N/A Symbol:
Value: Dike—Identity and existence are certain. Location is approximate. See unit description for Tim in the Description of Map Units. Label: Dike—Identity and existence are certain. Location is approximate. See unit description for Tim in the Description of Map Units. Description: N/A Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: FGDCGeoAge Font Style: normal Font Weight: normal Font Decoration: none
Min. Scale: 600000.0 Max. Scale: 0.0
Feature Draw Order:
N/A
Advanced Query Capabilities:
Supports Statistics: true
Supports OrderBy: true
Supports Distinct: true
Supports Pagination: true
Supports Result Pagination Token: false
Supports TrueCurve: true
Supports Returning Query Extent: true
Supports Query With Distance: true
Supports Sql Expression: true
Supports Query With ResultType: true
Supports Returning Geometry Centroid: false
Supports Binning LOD: false
Supports Query With LOD Spatial Reference: false
Supports Percentile Statistics: true
Supports Having Clause: true
Supports Count Distinct: true
Supports Time Relation: true
Supports Sql Format: false
Supports Query Analytic: false
Supports Query With Cache Hint: false
Supports Query With Current User: true
Supports Query With Result Type: true
HasZ: false
HasM: false
Time Info:
Start Time Field: N/A
End Time Field: N/A
Track ID Field: N/A
Time Extent:
N/A
Time Reference:
Time Zone: Mountain Standard Time Respects Daylight Saving: true
Time Interval: N/A
Time Interval Units: N/A
Has Live Data: false
Has Attachments: false
Has Last Edit Time: true
HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText
DataSourceID
(
nullable: true, length: 50, alias: DataSourceID, type: esriFieldTypeString
, Coded Values:
[DS00: IFSAR DEM ca. 2008; This data was produced by Intermap Technologies Inc.; Use Constraints: NGA End User License DoD Title 50 Uplift]
, [DS01: New Mexico Bureau of Geology and Mineral Resources, 2003, Geologic Map of New Mexico, 1:500,000: converted from previous data model to a USGS GeMS Level 3 data model by Kelsey Romero, Amy L. Dunn, and Phil L. Miller]
)
Description: Geologic Map of New Mexico. This feature class represents contacts between geologic units which may be either lithostratigraphic (stratiform) and lithodemic (do not conform to law of superposition) within the Geologic Map of New Mexico. ContactsAndFaults and MapUnitLines are used to build polygons (MapUnitPolys) and are topologically related to these polygons. These feature classes also represents mapped faults, joints, sheer zones, key beds, and thin map units (measured fault orientations are stored in OrientationPoints) related to contacts between geologic units. Fault data such as measurements of fault planes and slickenlines are recorded as point data in OrientationPoints which, for mapped faults, lie along these lines.Map boundaries, open water boundaries, and snowfield and glacier boundaries delineate the edge of certain map unit polygons and in this sense are contacts. Therefore, they are included in this feature class. Map-unit-bounding fault lines are legitimate elements of this feature class and should not be coincident with contacts.Lines symbolized as “contact”, “contact inferred” and “contact approximately located” are Type = “contact”, but have differing LocationConfidenceMeters, ExistenceConfidence, and (or) IdentityConfidence. Their symbolization may change with map scale.We recommend using “blank” as the value of Symbol for scratch boundaries (where no line is drawn between adjoining polygons, also known as wash boundaries); scratch boundaries are occasionally used for contacts with exceptionally large values of LocationConfidenceMeters.Example values for the Type field can include:contactinternal contactgradational contactfaultnormal faultreverse faultthrust faultmap boundarykey bedSymbolization should follow the FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006) with few exceptions. If the FGDC Standard does not define a suitable symbol required for a geologic map, the standard may be supplemented with custom symbols or a repurposed symbol may be used with the existing FGDC symbols that are “repurposed” for alternate use in the map. Such repurposed symbols should be identified in the RepurposedSymbols data table, which becomes a required table if FGDC symbols are repurposed.These data are coded using a "zero" padded code (01.01.01 vs 1.1.1) using the USGS published FGDC Digital Cartographic Standard for Geologic Map Symbolization.The New Mexico Bureau of Geology and Mineral Resources have configured a data table that contains the definitions and symbol codes to readily reference the symbology used in the feature classes. This data table is named FGDC_Symbols. This will be the primary table used to generate the "Explanation of Map Symbols" in a map layout. When used in conjunction with the RepurposedSymbols data table, the FGDC_Symbols will record any deviations from the FGDC Standard.This list is derived from the FGDC standard, sections 1, 2, 30, and 31. Other values certainly are possible. In all cases, note that modifiers such as “approximate”, “certain”, “concealed”, and “queried” are not encoded in Type. These modifiers reflect the convolution of LocationConfidenceMeters, ExistenceConfidence, IdentifyConfidence, and the map scale. The description of a contact as “approximate” is not literally preserved in a GeMS database; this information is preserved with the appropriate value of LocationConfidenceMeters. When migrating an existing map into the GeMS schema it is often convenient to store “contact, approximate” in a temporary field (e.g., LTYPE) that is later parsed to calculate values of Type, LocationConfidenceMeters, etc.COMMENTS TO MAP USERSA geologic map displays information on the distribution, nature, orientation, and age relationships of rock and deposits and the occurrence of structural features. Geologic and fault contacts are irregular surfaces that form boundaries between different types or ages of units. Data depicted on this geologic quadrangle map may be based on any of the following: reconnaissance field geologic mapping, a compilation of published and unpublished work, and photogeologic interpretation. Locations of contacts are not surveyed but are plotted by interpretation of the position of a given contact onto a topographic base map; therefore, the accuracy of contact locations depends on the scale of mapping and the interpretation of the geologist(s). Any enlargement of this map could cause misunderstanding in the detail of mapping and may result in erroneous interpretations. Site-specific conditions should be verified by detailed surface mapping or subsurface exploration. Topographic and cultural changes may not be shown due to recent development. Cross sections are constructed based upon the interpretations of the author made from geologic mapping and available geophysical and subsurface (drill hole) data.Cross sections should be used as an aid to understanding the general geologic framework of the map area and not be the sole source of information for use in locating or designing wells, buildings, roads, or other human-made structures.The New Mexico Bureau of Geology and Mineral Resources created the Open-File Geologic Map Series to expedite the dissemination of these geologic maps and map data to the public as rapidly as possible while allowing for map revision as geologists continued to work in map areas. Each map sheet carries the original date of publication below the map and the latest revision date in the upper right corner. In most cases, the original publication date coincides with the date of delivery of the map product to the National Cooperative Geologic Mapping Program (NCGMP) as part of New Mexico’s STATEMAP agreement. While maps are produced, maintained, and updated in an ArcGIS geodatabase, at the time of the STATEMAP deliverable, each map goes through cartographic production and internal review before uploading to the Internet. Even if additional updates are carried out on the ArcGIS map data files, citations to these maps should reflect this original publication date and the original authors listed. The views and conclusions contained in these map documents are those of the authors and should not be interpreted as necessarily representing the official policies, either expressed or implied, of the State of New Mexico or the U.S. Government.
Service Item Id: 06d22ee128344288b361cc4b9c908c76
Copyright Text: New Mexico Bureau of Geology & Mineral Resources
Unique Value Renderer: Field 1: Description Field 2: N/A Field 3: N/A Field Delimiter: , Default Symbol:
N/A
Default Label: N/A UniqueValueInfos:
Value: Contact—Identity and existence are certain. Location is accurate. Label: Contact—Identity and existence are certain. Location is accurate. Description: N/A Symbol:
Value: Internal contact—Identity and existence are certain. Location is accurate. Label: Internal contact—Identity and existence are certain. Location is accurate. Description: N/A Symbol:
Value: Gradational contact—Identity and existence are certain. Location is accurate. Label: Gradational contact—Identity and existence are certain. Location is accurate. Description: N/A Symbol:
Value: Fault (generic)—Identity and existence are certain. Location is accurate. Label: Fault (generic)—Identity and existence are certain. Location is accurate. Description: N/A Symbol:
Value: Fault (generic)—Identity and existence are certain. Location is approximate. Label: Fault (generic)—Identity and existence are certain. Location is approximate. Description: N/A Symbol:
Value: Fault (generic)—Identity and existence are certain. Location is inferred. Label: Fault (generic)—Identity and existence are certain. Location is inferred. Description: N/A Symbol:
Value: Fault (generic)—Identity and existence are certain. Location is concealed. Label: Fault (generic)—Identity and existence are certain. Location is concealed. Description: N/A Symbol:
Value: Ductile shear zone or mylonite zone—May or may not be associated with mappable faults. Label: Ductile shear zone or mylonite zone—May or may not be associated with mappable faults. Description: N/A Symbol:
DataSourceID
(
nullable: true, length: 50, alias: DataSourceID, type: esriFieldTypeString
, Coded Values:
[DS00: IFSAR DEM ca. 2008; This data was produced by Intermap Technologies Inc.; Use Constraints: NGA End User License DoD Title 50 Uplift]
, [DS01: New Mexico Bureau of Geology and Mineral Resources, 2003, Geologic Map of New Mexico, 1:500,000: converted from previous data model to a USGS GeMS Level 3 data model by Kelsey Romero, Amy L. Dunn, and Phil L. Miller]
)
Description: Geologic Map of New Mexico. This feature class represents geologic units, water, or anthropogenic deposits (built from ContactsAndFaults and MapUnitLines) that occupy mappable areas. Detailed information about each mapped unit is provided via a join based on the MapUnit field to the DescriptionOfMapUnits table.COMMENTS TO MAP USERSA geologic map displays information on the distribution, nature, orientation, and age relationships of rock and deposits and the occurrence of structural features. Geologic and fault contacts are irregular surfaces that form boundaries between different types or ages of units. Data depicted on this geologic quadrangle map may be based on any of the following: reconnaissance field geologic mapping, a compilation of published and unpublished work, and photogeologic interpretation. Locations of contacts are not surveyed but are plotted by interpretation of the position of a given contact onto a topographic base map; therefore, the accuracy of contact locations depends on the scale of mapping and the interpretation of the geologist(s). Any enlargement of this map could cause misunderstanding in the detail of mapping and may result in erroneous interpretations. Site-specific conditions should be verified by detailed surface mapping or subsurface exploration. Topographic and cultural changes may not be shown due to recent development. Cross sections are constructed based upon the interpretations of the author made from geologic mapping and available geophysical and subsurface (drill hole) data.Cross sections should be used as an aid to understanding the general geologic framework of the map area and not be the sole source of information for use in locating or designing wells, buildings, roads, or other human-made structures.The New Mexico Bureau of Geology and Mineral Resources created the Open-File Geologic Map Series to expedite the dissemination of these geologic maps and map data to the public as rapidly as possible while allowing for map revision as geologists continued to work in map areas. Each map sheet carries the original date of publication below the map and the latest revision date in the upper right corner. In most cases, the original publication date coincides with the date of delivery of the map product to the National Cooperative Geologic Mapping Program (NCGMP) as part of New Mexico’s STATEMAP agreement. While maps are produced, maintained, and updated in an ArcGIS geodatabase, at the time of the STATEMAP deliverable, each map goes through cartographic production and internal review before uploading to the Internet. Even if additional updates are carried out on the ArcGIS map data files, citations to these maps should reflect this original publication date and the original authors listed. The views and conclusions contained in these map documents are those of the authors and should not be interpreted as necessarily representing the official policies, either expressed or implied, of the State of New Mexico or the U.S. Government.
Service Item Id: 06d22ee128344288b361cc4b9c908c76
Copyright Text: New Mexico Bureau of Geology & Mineral Resources
Value: 01-01-11-00-00:Qoa:Older alluvial deposits of upland plains and piedmont areas, and calcic soils and eolian cover sediments of High Plains region Label: Qoa—Older alluvial deposits of upland plains and piedmont areas, and calcic soils and eolian cover sediments of High Plains region Description: N/A Symbol:
Value: 02-01-04-00-00:Qvr:Ring-fracture rhyolite lava domes of the Valles caldera Label: Qvr—Ring-fracture rhyolite lava domes of the Valles caldera Description: N/A Symbol:
Value: 02-01-05-00-00:Qr:Older rhyolite lavas and early volcaniclastic sedimentary fill deposits of the Valles caldera Label: Qr—Older rhyolite lavas and early volcaniclastic sedimentary fill deposits of the Valles caldera Description: N/A Symbol:
Value: 02-03-07-00-00:Tuau:Upper middle Tertiary basaltic andesites and andesites of the Mogollon Group Label: Tuau—Upper middle Tertiary basaltic andesites and andesites of the Mogollon Group Description: N/A Symbol:
Value: 02-03-08-00-00:Tual:Lower-upper middle Tertiary basaltic andesites and andesites of the Mogollon Group Label: Tual—Lower-upper middle Tertiary basaltic andesites and andesites of the Mogollon Group Description: N/A Symbol:
Value: 03-09-00-00-00:Knf:Fort Hays Limestone Member of Niobrara Formation Label: Knf—Fort Hays Limestone Member of Niobrara Formation Description: N/A Symbol:
Value: 03-12-00-00-00:Klv:La Ventana Tongue of the Cliff House Sandstone Label: Klv—La Ventana Tongue of the Cliff House Sandstone Description: N/A Symbol:
Value: 03-20-00-00-00:Kgm:Gallup Sandstone and underlying D-Cross Tongue of the Mancos Shale Label: Kgm—Gallup Sandstone and underlying D-Cross Tongue of the Mancos Shale Description: N/A Symbol:
Value: 03-22-00-00-00:Kpg:Pescado Tongue of the Mancos Shale and Gallup Sandstone Label: Kpg—Pescado Tongue of the Mancos Shale and Gallup Sandstone Description: N/A Symbol:
Value: 03-28-00-00-00:Kdr:Dakota Sandstone (Cenomanian) and Rio Salado Tongue of the Mancos Shale Label: Kdr—Dakota Sandstone (Cenomanian) and Rio Salado Tongue of the Mancos Shale Description: N/A Symbol:
Value: 03-34-00-00-00:Kmd:Intertongued Mancos Shale and Dakota Sandstone of west-central New Mexico Label: Kmd—Intertongued Mancos Shale and Dakota Sandstone of west-central New Mexico Description: N/A Symbol:
Value: 03-36-00-00-00:Kdg:Upper and Lower Cretaceous rocks of east-central and northeast New Mexico Label: Kdg—Upper and Lower Cretaceous rocks of east-central and northeast New Mexico Description: N/A Symbol:
Value: 04-03-00-00-00:Jmsu:Morrison Formation and upper San Rafael Group Label: Jmsu—Morrison Formation and upper San Rafael Group Description: N/A Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: FGDCGeoAge Font Style: normal Font Weight: normal Font Decoration: none
Min. Scale: 600000.0 Max. Scale: 0.0
Feature Draw Order:
N/A
Advanced Query Capabilities:
Supports Statistics: true
Supports OrderBy: true
Supports Distinct: true
Supports Pagination: true
Supports Result Pagination Token: false
Supports TrueCurve: true
Supports Returning Query Extent: true
Supports Query With Distance: true
Supports Sql Expression: true
Supports Query With ResultType: true
Supports Returning Geometry Centroid: false
Supports Binning LOD: false
Supports Query With LOD Spatial Reference: false
Supports Percentile Statistics: true
Supports Having Clause: true
Supports Count Distinct: true
Supports Time Relation: true
Supports Sql Format: false
Supports Query Analytic: false
Supports Query With Cache Hint: false
Supports Query With Current User: true
Supports Query With Result Type: true
HasZ: false
HasM: false
Time Info:
Start Time Field: N/A
End Time Field: N/A
Track ID Field: N/A
Time Extent:
N/A
Time Reference:
Time Zone: Mountain Standard Time Respects Daylight Saving: true
Time Interval: N/A
Time Interval Units: N/A
Has Live Data: false
Has Attachments: false
Has Last Edit Time: true
HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText
DataSourceID
(
nullable: true, length: 50, alias: DataSourceID, type: esriFieldTypeString
, Coded Values:
[DS00: IFSAR DEM ca. 2008; This data was produced by Intermap Technologies Inc.; Use Constraints: NGA End User License DoD Title 50 Uplift]
, [DS01: New Mexico Bureau of Geology and Mineral Resources, 2003, Geologic Map of New Mexico, 1:500,000: converted from previous data model to a USGS GeMS Level 3 data model by Kelsey Romero, Amy L. Dunn, and Phil L. Miller]
)
DescriptionSourceID
(
nullable: true, length: 50, alias: DescriptionSourceID, type: esriFieldTypeString
, Coded Values:
[DS00: IFSAR DEM ca. 2008; This data was produced by Intermap Technologies Inc.; Use Constraints: NGA End User License DoD Title 50 Uplift]
, [DS01: New Mexico Bureau of Geology and Mineral Resources, 2003, Geologic Map of New Mexico, 1:500,000: converted from previous data model to a USGS GeMS Level 3 data model by Kelsey Romero, Amy L. Dunn, and Phil L. Miller]
)
Description: This is a lookup/definition table and provides descriptions or definition for geologic or regionally specific terms. Terms that require definition include all values of Type, ExistenceConfidence, IdentityConfidence, ParagraphStyle, GeoMaterialConfidence, ErrorMeasure, AgeUnits, LocationMethod, and ScientificConfidence. If there are no intellectual property restrictions, it is permissible and recommended to replicate all or part of an external glossary here. Appropriate credit for definitions is provided via the DefinitionSourceID. If such restrictions preclude including a definition in the glossary, the term should still be present, with a note in the definition field to refer the reader to the publication cited in the definition-source record. Values of Term may be used in fields of other tables where they function as foreign keys to the Glossary table.COMMENTS TO MAP USERSA geologic map displays information on the distribution, nature, orientation, and age relationships of rock and deposits and the occurrence of structural features. Geologic and fault contacts are irregular surfaces that form boundaries between different types or ages of units. Data depicted on this geologic quadrangle map may be based on any of the following: reconnaissance field geologic mapping, a compilation of published and unpublished work, and photogeologic interpretation. Locations of contacts are not surveyed but are plotted by interpretation of the position of a given contact onto a topographic base map; therefore, the accuracy of contact locations depends on the scale of mapping and the interpretation of the geologist(s). Any enlargement of this map could cause misunderstanding in the detail of mapping and may result in erroneous interpretations. Site-specific conditions should be verified by detailed surface mapping or subsurface exploration. Topographic and cultural changes may not be shown due to recent development. Cross sections are constructed based upon the interpretations of the author made from geologic mapping and available geophysical and subsurface (drill hole) data.Cross sections should be used as an aid to understanding the general geologic framework of the map area and not be the sole source of information for use in locating or designing wells, buildings, roads, or other human-made structures.The New Mexico Bureau of Geology and Mineral Resources created the Open-File Geologic Map Series to expedite the dissemination of these geologic maps and map data to the public as rapidly as possible while allowing for map revision as geologists continued to work in map areas. Each map sheet carries the original date of publication below the map and the latest revision date in the upper right corner. In most cases, the original publication date coincides with the date of delivery of the map product to the National Cooperative Geologic Mapping Program (NCGMP) as part of New Mexico’s STATEMAP agreement. While maps are produced, maintained, and updated in an ArcGIS geodatabase, at the time of the STATEMAP deliverable, each map goes through cartographic production and internal review before uploading to the Internet. Even if additional updates are carried out on the ArcGIS map data files, citations to these maps should reflect this original publication date and the original authors listed. The views and conclusions contained in these map documents are those of the authors and should not be interpreted as necessarily representing the official policies, either expressed or implied, of the State of New Mexico or the U.S. Government.
Service Item Id: 06d22ee128344288b361cc4b9c908c76
Copyright Text: New Mexico Bureau of Geology and Mineral Resources
Default Visibility: false
Max Result Window: N/A
Max Record Count: 2000
Standard Max Record Count No Geometry: N/A
Max Record Count Factor: 1
Standard MaxRecord Count: 32000
Tile Max Record Count: 2000
MaxSelectionCount: 0
Supported Query Formats: JSON, PBF
Supports Advanced Queries: true
Supports Statistics: true
Use Standardized Queries: true
Extent:
Drawing Info:
N/A
Feature Draw Order:
N/A
Advanced Query Capabilities:
Supports Statistics: true
Supports OrderBy: true
Supports Distinct: true
Supports Pagination: true
Supports Result Pagination Token: false
Supports TrueCurve: false
Supports Returning Query Extent: true
Supports Query With Distance: true
Supports Sql Expression: true
Supports Query With ResultType: true
Supports Returning Geometry Centroid: false
Supports Binning LOD: false
Supports Query With LOD Spatial Reference: false
Supports Percentile Statistics: true
Supports Having Clause: true
Supports Count Distinct: true
Supports Time Relation: true
Supports Sql Format: false
Supports Query Analytic: false
Supports Query With Cache Hint: false
Supports Query With Current User: true
Supports Query With Result Type: true
HasZ: false
HasM: false
Time Info:
Start Time Field: N/A
End Time Field: N/A
Track ID Field: N/A
Time Extent:
N/A
Time Reference:
Time Zone: Mountain Standard Time Respects Daylight Saving: true
Time Interval: N/A
Time Interval Units: N/A
Has Live Data: false
DefinitionSourceID
(
nullable: true, length: 50, alias: DefinitionSourceID, type: esriFieldTypeString
, Coded Values:
[DefSource01: AGI Glossary of Geology]
, [DefSource03: United States Geological Survey, 2020, GeMS (Geologic Map Schema)- A Standard Format for the Digital Publication of Geologic Maps, Reston VA, Techniques and Methods 11-B10, Chapter 10]
, [DefSource05: Geologic Map Production Group, New Mexico Bureau of Geology and Mineral Resources]
)